Pfaff ClassicStyle 2027 Owner's Manual - Page 20

Attaching the presser foot, Check, Setting the needle thread tension, Winding a bobbin through

Get Pfaff ClassicStyle 2027 PDF manuals and user guides View all Pfaff ClassicStyle 2027 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Preparations 2:10 Attaching the presser foot Place the presser foot under the presser foot holder (13), so that when the presser foot lifter (20) is lowered, the pins of the foot engage in the presser foot holder. Check: Please check that the presser foot is properly attached by raising the presser foot lifter. Setting the needle thread tension Set the required amount of the needle thread tension (18) using the markings on the tension dial. The normal setting for sewing is 4 - 5. For decorative sewing, darning and buttonhole sewing 3. Winding a bobbin through the needle It is possible to wind bobbins even when the machine is fully threaded. Raise the presser foot lifter (20) to the top position. Pull the needle thread underneath the presser foot and upward through the right-hand threader slot (17).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
2:10
Preparations
Attaching the presser foot
Place the presser foot under the presser foot holder (13), so that
when the presser foot lifter (20) is lowered, the pins of the foot
engage in the presser foot holder.
Check:
Please check that the presser foot is properly attached by raising the
presser foot lifter.
Setting the needle thread tension
Set the required amount of the needle thread tension (18) using
the markings on the tension dial.
The normal setting for sewing is 4 - 5. For decorative sewing,
darning and buttonhole sewing 3.
Winding a bobbin through the needle
It is possible to wind bobbins even when the machine is fully
threaded. Raise the presser foot lifter (20) to the top position.
Pull the needle thread underneath the presser foot and upward
through the right-hand threader slot (17).