Pfaff ClassicStyle 2027 Owner's Manual - Page 16
Inserting the bobbin
View all Pfaff ClassicStyle 2027 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Preparations A B 2:6 Thread tension To obtain a perfect seam appearance and durability make sure the needle thread tensions is correctly adjusted, i.e. the threads evenly meet between the two fabric layers. The following is valid for general sewing: Bobbin thread is visible on the top side of the fabric: The needle thread tension is too tight. The thread tension must be corrected. Top thread is visible on the underside of the fabric: The needle thread tension is too loose. The thread tension must be corrected. For decorative stitches and buttonholes the top thread should be visible on the underside of the fabric. Inserting the bobbin Insert the full bobbin (with the Pfaff logo facing towards the bobbin case) in the bobbin case. When doing so, pull the thread through slot A, then under tension spring B until it rests in the opening (see arrow). Check: When you look at the bobbin and pull the thread, the bobbin must turn clockwise Inserting the bobbin case Lift latch E and push the bobbin case fully onto pin C of the sewing hook. Opening D of the bobbin case must face upwards. Check: Pull the bobbin thread sharply. The bobbin case must not fall out of the hook.