Philips DVD750VR User manual - Page 43

H9420UD(p1-51).QX4 03.7.18 11:59 AM Page 43 Timer Recording with the VCR Plus+ Programming System (cont'd) 43 5 Press o or p until your desired tape speed appears. (Example: SP) There are cases in which the program information does not match your area. If the incorrect information appears, select the number you want to change using s.Then, enter the correct numbers using o or p. ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 05/04 SUN START TIME 07:30 PM END TIME 08:30 PM CHANNEL 16 REC SPEED BSP SP SLP 6 Press CLEAR/RESET. 7 Press TIMER SET. The DVD/VCR will turn off and the red RECORD TIMER light will appear on the front of the DVD/VCR. In some cases, the DVD/VCR will switch to DVD mode instead.You may use the DVD Player during a timer recording. If you want to use the VCR until time for the recording, don't press TIMER SET until a few minutes before the recording should start. Or, press TIMER SET only when you know you won't be using the VCR anymore (until after the recording).When the RECORD TIMER light is on, you cannot put the DVD/VCR in VCR mode by pressing VCR or SOURCE.You must first press TIMER SET to cancel the timer recording temporarily.Then, you can use the VCR features again. 5 7 STANDBY-ON SEARCH MODE DISPLAY REPEAT REPEAT AUDIO A-B SUBTITLE ZOOM ANGLE SKIP / CH RETURN TITLE CLEAR/RESET SLOW DVD SYSTEM MENU VCR/TV VCR DISC/VCR MENU OK STOP PLAY PAUSE TIMER SET VCR Plus+ RECORD SPEED 1 45 89 2 3 67 0 +10 6 Press TIMER SET for the recording. Insert a tape in the VCR. Leave the Cable Box/DBS on (if applicable).