Pioneer DJM-700 Owner's Manual - Page 15
Using the Cross Fader to Start Playback]
UPC - 012562860862
View all Pioneer DJM-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
MIXER OPERATIONS [Using the Cross Fader to Start Playback] FADER START 1 1, 2 CROSS FADER 2 ASSIGN A / THRU / B 35 1 Press the FADER START button for the channel (1, 2) connected to the CD player you wish to control. • The button for the selected channel lights. 2 Set the CROSS FADER ASSIGN switch for the selected channel to [A] or [B]. • Select [A] to assign to cross fader channel A (left side). • Select [B] to assign to cross fader channel B (right side). 3 Move the cross fader lever to the full opposite side away from the CD player you wish to start. 4 Set the CD player to the desired cue point, and engage cue point standby. • If a cue point has already been set, it is not necessary to set the CD player to standby at the cue point. 5 At the instant you wish to start playback, move the cross fader lever. • CD player begins playback. • After playback has begun, if the cross fader lever is moved fully to the opposite side, the CD player assigned to the opposite side channel will return to the cue point and enter standby mode (back cue). 15 En