Pioneer DJM-700 Owner's Manual - Page 8

CONNECTIONS ABOUT MIDI CONNECTORS See P. 21 regarding the functions of MIDI connectors. CONNECTING MICROPHONE AND HEADPHONES Microphone A microphone with XLR-type plug can be connected to the MIC 1 connector on the Operation Panel (upper) . The MIC 2 jack on the connection panel can be used to connect a microphone with Ø6.3 mm phone plugs. • When using a microphone, set the operating panel's MIC switch to [ON] or [TALK OVER], and adjust the LEVEL dial as necessary. When not using a microphone, it is recommended to set the MIC switch to [OFF] and rotate the LEVEL dial fully counterclockwise to the [-∞] side. Headphones The PHONES jack on the upper surface of the operating panel can be used to connect headphones with a Ø6.3 mm stereo phone plug. HEADPHONES MONO SPLIT STEREO MIXING Microphone 1 CUE MASTER LEVEL Headphones 0 PHONES Microphone 2 MIC 2 MIDI OUT MIC1 MIC1 LEVEL OV 1 0 7 MIC2 LEVEL 4 2 1 0 0 - HI - - - -12 +12 - LOW EQ - - - d -12 +12 MIC TALK OFF ON OVER FADER START CH-1 CH-2 CONNECTING THE POWER CORD Connect the power cord last. • After completing all other connections, connect the power plug to an ordinary AC outlet. 8 En