Pioneer DJM-700 Owner's Manual - Page 21
Midi Settings - djm 700s
UPC - 012562860862
View all Pioneer DJM-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
MIDI SETTINGS MIDI SETTINGS MIDI is an acronym for "Musical Instrument Digital Interface" and refers to a protocol developed for the exchange of data between electronic instruments and computers. A MIDI cable is used to connect components equipped with MIDI connectors to enable the transmission and receipt of data. The DJM-700-S/DJM-700-K uses the MIDI protocol for transmitting data about component operation and BPM (timing clock). DJ CD Player OUT Audio IN BPM =120 MIDI sequencer BPM =120 IN MIDI OUT MIDI START /STOP TIME SYNCHRONIZING AUDIO SIGNALS TO EXTERNAL SEQUENCER, OR USING DJM-700-S/DJM-700-K INFORMATION TO OPERATE AN EXTERNAL SEQUENCER 1 Use a commercially available MIDI cable to connect the DJM-700-S/DJM-700-K's MIDI OUT connector to the MIDI sequencer's MIDI IN connector. • Set the MIDI sequencer's synch mode to "Slave". • MIDI sequencers that do not support MIDI timing clock cannot be synchronized. • Synch may not be achieved if the track's BPM cannot be detected and measured stably. • BPM values set with the TAP mode can also be used to output the timing clock. 2 Press the MIDI START/STOP button. • The MIDI timing clock output range is 40 to 250 BPM. [MIDI Channel Setting] The MIDI channel (1 to 16) can be set and stored in memory. 1 While holding the MIDI START/STOP button depressed, set the power switch to ON. • The display will show [CH SET] and the unit will enter the MIDI setting mode. 2 Rotate the TIME dial to select the MIDI channel. 3 Press the MIDI START/STOP button. • Records MIDI channel. During recording of channel, [SAVE] indicator flashes. • When recording of channel is completed, [END] is displayed. 4 Set power to OFF. DJM-700-S/DJM-700-K 21 En