Pioneer DJM-700 Owner's Manual - Page 6

CONNECTIONS Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections. CONNECTING INPUTS Pioneer DJ CD players The audio output connectors of a DJ-type CD player can be connected to the CD input connectors (channel 1 or 2), or to the LINE input connectors (channel 1) of the DJM-700-S/DJM-700-K. Connect the control cord to the CONTROL jack, and set the input selector switch to [CD] or [LINE]. Analog turntable To connect an analog turntable, connect the turntable's audio output cable to one of the channel 2 to 4 PHONO input connectors. Set the corresponding channel's input selector switch to [PHONO]. The DJM-700-S/DJM-700-K's PHONO inputs support MM cartridges. Connect the ground wire from an analog turntable to the SIGNAL GND terminal of the DJM-700-S/DJM-700-K. • Note that no PHONO input connector is provided for channel 1. Connecting other line level output devices To use a cassette deck or ordinary CD player, connect its audio output connectors to one of the DJM-700-S/DJM-700-K's LINE input connectors (channel 1, 3, or 4) or to the CD input connectors (channel 1 or 2), and set the input selector switch to [LINE]. Input selector switch POWER OFF ON BOOTH REC L 1 GND 2 HOT R 3 COLD R MASTER1 L CH-4 PHONO LINE L CH-3 PHONO LINE L CH-2 PHONO CD L CH-1 LINE CD L CONTROL CONTROL MIC 2 R MASTER2 MASTER RL ATT. -6dB -3dB 0dB R SIGNAL GND SEND R L(MONO) R R RETURN R L(MONO) DIGITAL OUT fs(Hz) 48k 96k MIDI OUT CD player, etc. Analog turntable Analog turntable DJ CD player DJ CD player Cassette deck, etc. 6 En