Pioneer DJM-700 Owner's Manual - Page 19
Manual Filter Operation, Effect Frequency Filter Operation - outputs
UPC - 012562860862
View all Pioneer DJM-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
EFFECT FUNCTIONS MANUAL FILTER OPERATION 1 MANUAL FILTER The filter frequency is shifted, resulting in strong changes to the tone. Rotating the dial to the right produces high-pass filter effects, while rotating the dial to the left produces low-pass filter effects. Low-pass filter High-pass filter FREQUENCY LPF HPF Frequency Frequency EFFECT FREQUENCY FILTER OPERATION 1 Effect frequency filter Sets the filter's cutoff frequency, allowing the beat effect to be applied to a desired frequency band alone. Through FREQUENCY Through LPF HPF Frequency Beat effect Frequency Beat effect 1 FILTER 3 FREQUENCY 2 2 FILTER 3 FREQUENCY The manual effecter is linked to the FREQUENCY dial. The output sounds of the manual effecter become the input sounds for the beat effect. • When the beat effect type is set to ROLL, REVERSE ROLL, UP ROLL, or DOWN ROLL, the beat effect's output sound becomes the input sound for the manual effecter. 1 Press the FILTER button so that it flashes. • Confirm that the FILTER button flashes steadily. • When it lights, press the button so that it flashes. Each time the button is pressed, it alternates between flashing and lighting steadily. • When power is first turned ON, defaults to steadily lighted. 2 Use the effect channel select switch to choose the channel to which you wish to apply the effects. • The name of the selected channel will appear in the display's channel name section. • When [MIC] is selected, the effect will be applied to both microphone 1 and microphone 2. 3 Use the FREQUENCY dial to adjust the filter's cutoff frequency. • Rotate counterclockwise to apply a low-pass filter. • Rotate clockwise to apply a high-pass filter. The effect frequency filter is linked to the FREQUENCY dial. The beat effect is applied only to the selected frequency band. • The function is not supported when SEND/RETURN is selected as the type of beat effect. 1 Press the FILTER button so that it lights. • Confirm that the FILTER button lights steadily. • When flashing, press the button so that it lights. Each time the button is pressed, it alternates between flashing and lighting steadily. • When power is first turned ON, defaults to steadily lighted. 2 Operate the beat effect. • For details, see page 18. 3 Use the FREQUENCY dial to select the frequency to which you wish to apply the beat effect. • Rotate counterclockwise to apply the effect to low-range sounds only. High-frequency sounds are set to through. • Rotate clockwise to apply the effect to high-range sounds only. Low-frequency sounds are set to through. 19 En