ProForm Pro C22 Instruction Manual - Page 10
Tip: Avoid pinching the wires., Avoid, pinching, the wires, See the inset drawing.
View all ProForm Pro C22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8. See the inset drawing. Connect the connector on the Handlebar Wire (90) to the connector on 8 the Frame Wire (82). Next, tighten the zip tie (C) around the indicated mark (D) on the Handlebar Wire (90). Then, cut off the excess zip tie. C 82 90 9. Tip: Avoid pinching the wires. Press the Motor Cover (38) onto the Frame (1), and attach it with 9 an M4 x 20mm Screw (80). C D 82 90 80 38 Avoid pinching 1 the wires 10
10
9
9.
Tip: Avoid pinching the wires.
Press the Motor
Cover (38) onto the Frame (1), and attach it with
an M4 x 20mm Screw (80).
80
38
1
Avoid
pinching
the wires
8.
See the inset drawing.
Connect the connector
on the Handlebar Wire (90) to the connector on
the Frame Wire (82).
Next, tighten the zip tie (C) around the indicated
mark (D) on the Handlebar Wire (90). Then, cut
off the excess zip tie.
8
90
82
C
C
D
90
82