ProForm Pro C22 Instruction Manual - Page 11
Tip: Avoid pinching the wires., Make sure that the, wires inside the Handlebar are out of the way,
View all ProForm Pro C22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. While a second person holds the Console Mount (5) near the Handlebar (4), connect the Mount Wire (91) in the Console Mount to the Handlebar Wire (90) in the Handlebar. Tip: Avoid pinching the wires. Gently pull on the wire tie (E) as you slide the Console Mount (5) onto the Handlebar (4). Make sure that the wires inside the Handlebar are out of the way of the bolt holes. You can attach the Console Mount (5) in either the standard position or the extended position. For the standard position, align the Console Mount with the inner holes (F, G). For the extended position, align the Console Mount with the outer holes (G, H). Tip: Avoid pinching the wires. Attach the Console Mount (5) with two M6 Bolt Sets (70). 10 Avoid pinching the wires E 4 70 5 91 90 70 H G F 11. While a second person holds the Console (6) near the Console Mount (5), press the Wire 11 Protector (98) around the Console Wires (I) in the location shown. 6 98 I 5 11