ProForm Pro C22 Instruction Manual - Page 28

HOW TO USE THE SOUND SYSTEM Connect with an Audio Cable To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the right side of the console and into a jack on your personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. Connect Your Headphones If the console has a headphones jack, you can plug your headphones into the headphones jack to listen to audio from the console through your headphones. Connect Your Headphones with Bluetooth If the console is enabled with this feature, you can connect your Bluetooth-compatible headphones to listen to audio from the console through your headphones. Next, press the play button on your personal audio player. Adjust the volume level by pressing the volume increase and decrease buttons on the right side of the console or the volume control on your personal audio player. To listen to the console audio with your personal headphones or ear buds, plug your headphones into the headphones jack on the right side of the console. Connect Your Device with Bluetooth If the console has a Bluetooth Audio button, you can connect your Bluetooth-compatible device to play audio through the console sound system. 1. Place or hold your Bluetooth-compatible device near the console. 2. Enable the Bluetooth setting on your device. 3. Pair your device to the console. Press and hold the Bluetooth Audio button on the console for 3 seconds. The Bluetooth Audio button will begin flashing and the console will enter pairing mode. When your device and the console pair successfully, the audio from your device will play through the console sound system. Note: The console can save 8 devices in its memory. If you have previously paired your device to the console, you can simply press the Bluetooth Audio button to connect your device to the console. 4. Erase the console device memory if necessary. To connect your headphones to the console, first turn on your headphones and place them near the console. Next, select a featured workout (see page 21) or an iFit workout (see page 24). Then, touch Connect Bluetooth Headphones when this option appears on the screen. To pair your headphones to the console, select your headphones from the list on the screen. When your headphones and the console pair successfully, the audio from the console will play through your headphones. THE OPTIONAL HEART RATE MONITOR Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the best results is to maintain the proper heart rate during your workouts. The optional heart rate monitor will enable you to continuously monitor your heart rate while you exercise, helping you to reach your personal fitness goals. To purchase an optional heart rate monitor, please see the front cover of this manual. Note: The console is compatible with all Bluetooth Smart heart rate monitors. If you need to erase all the Bluetooth-compatible devices saved in the console memory, press and hold the Bluetooth Audio button for 10 seconds. 28