Samsung FPT5894 User Manual (ENGLISH) - Page 18

Operation Turning the TV and Wireless Home AV Center On and Off Press the POWER button on the remote control. The TV and Wireless Home AV Center will be turned on and you wil l be able to use their features. You can also use the Power button on the front of the TV ➢ If your TV isn't turned on when the Power button is pressed: Press the TV button to check if the TV mode has been chosen. Plug & Play Feature If you install the TV and the Wireless Home AV Center and turn them on, the TV and the Wireless Home AV Center are automatically connected. ➢ The Wireless Home AV Center does not have any controls or buttons (ie Power). When the TV is turned on, the Wireless Center will also turn on automatically. 1 Press the POWER button on the remote control. The message Connecting to Wireless Home AV Center is displayed. 2 Press the ENTER button, the Select the language of the OSD menu is automatically displayed. Press the ▲ or ▼ button to select language, then press the ENTER button. The message Select Home Mode when installing this TV at home. is automatically displayed. 3 Press the ◄ or ► button to select Shop or Home, then press the ENTER button. ➢ The default selection is Home. ➢ We recommend setting the TV to Home mode for the best picture in your home environment. ➢ Shop mode is only intended for use in retail environments. ➢ If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press any Volume button and then hold down the MENU button for five seconds on the TV panel. 4 Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTER button to select Start. ➢ If the antenna is connected to ANT1 IN(AIR), select Air and if it is connected to ANT 2 IN(CABLE), select Cable. ➢ If both ANT 1 IN(AIR) and ANT 2 IN(CABLE) are connected, select the Air + Cable. ➢ In Cable mode, select the correct analog signal cable system source among STD, HRC, and IRC by pressing the ▲ or ▼ button, then press the ENTER button. If you have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area. To memorize the channels, press the ► button to select Start, then press the ENTER button. Contact your local cable company to identify the type of cable system that exists in your particular area. AV CENTER Connecting to Wireless Home AV Center Plug & Play Select the language of the OSD. Menu Language :English Español Français Move Enter Skip RETURN Plug & Play Select Home Mode when installing this TV at home. FASV.ChHopAUTO PROG. ADD/DELHome Move Enter Skip Plug & Play Select the antennas to memorize. Air Start Cable Start Air + Cable Start Move Enter Skip Plug & Play Selects a cable signal type for your loction. Analog STD Start HRC IRC Digital STD HRC IRC Move Enter Skip English - 18 Continued...