Samsung HLT7288W User Manual (ENGLISH) - Page 84
Listening through a Home theater, Troubleshooting for Anynet+, The Connecting to Anynet+ device
UPC - 036725272880
View all Samsung HLT7288W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Listening through a Home theater You can listen to sound through a receiver (home theater) instead of the TV's speakers. 1 Press the Anynet+ button. Device List Record 2 Press the ▲ or ▼ button to select Receiver, press the ◄ or ► button to select to On. Now you can listen to sound through the Home theater receiver. Timer Recording Receiver Off Press the EXIT button to exit. Headset Connection Picture Setting ➢ When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Sound Setting Sleep Timer Off ▼ Move Enter Theater receiver. ➢ If your Home Theater receiver supports audio only, it may not appear in the device list. ➢ The receiver will work when you have properly connected the Optical IN jack of the receiver to the Optical Out jack of the TV. ➢ When the Home Theater is set to On, a Bluetooth device connected to the TV may not work properly. Operating a connected Bluetooth device may also make it impossible to hear audio from the Home Theater Receiver. ➢ When using the WISELINK feature, sound may not output properly through the receiver. ➢ When listening through the receiver, there are restrictions for using the PIP and audio-related(MTS, Preferred language) menus. Troubleshooting for Anynet+ Symptom Solution Anynet+ does not work. ■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. ■ Connect only one receiver (home theater). ■ Check if the Anynet+ device power cord is properly connected. ■ Check the Anynet+ device's Video/Audio/HDMI cable connections. ■ Check whether the TV remote control is in TV mode. ■ Check whether it is Anynet+ exclusive remote control. ■ Anynet+ doesn't work at a certain condition. (Searching channels, operating WISELINK) ■ When connecting or removing the HDMI cable, please make sure to search devices again or restart your TV. ■ Check if the Anynet+ Function of Anynet+ device is set on. I want to start Anynet+. ■ Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. ■ Press the TV button on the TV remote control to switch to TV. Then press the Anynet+ button to show the Anynet+ menu and select a menu you want. I want to exit Anynet+. ■ Select View TV in Anynet+ menu. ■ Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. ■ Press any of CH, CH LIST, PRE-CH, and FAV.CH to change to the TV mode. (Note that the channel button operates only when an Anynet+ device with a built-in tuner is not connected.) The Connecting to Anynet+ device ■ You cannot use the remote control when you are configuring Anynet+ or switching to a ...message appears on the screen. view mode. ■ Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. ■ You cannot use the play function when Plug & Play is in progress. The connected device is not displayed. ■ Check whether or not the device supports Anynet+ functions. ■ Check whether or not the HDMI cable is properly connected. ■ Check whether is set to in the Anynet+ setup menu. ■ Search Anynet+ devices again. ■ You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions. The TV program cannot be recorded. ■ Check whether the antenna jack on the recording device is properly connected. The TV sound is not output through the receiver. ■ Connect the optical cable between TV and the receiver. English - 84