Samsung RF23HSESBSR User Manual Ver.03 (English, French, Spanish) - Page 13
Re-attaching The Water, Supply Lines, Disassembling The Flex, Take Out The Flex Zone
View all Samsung RF23HSESBSR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
setting up RE-ATTACHING THE WATER SUPPLY LINES To reattach the fridge doors after you have moved the fridge to its final location, assemble the parts in reverse order. 2. Take off the cover ( 2 ) with the harness using a flat-blade screwdriver (-). (2) 1. The Water Line must be fully inserted into the center of the transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser. 2. Insert the clip from the install pack and confirm that it holds the line firmly. Type A Type B 3. Press the locking tab, and then separate the Wire Connector. Dispenser Center of Transparent coupler clip A (1/4") (6.35 mm) The Guide Lines clip A (1/4") (6.35 mm) DISASSEMBLING THE FLEX DOOR 1. Take out the Flex Zone ( 1 ) by lifting it up. 4. Remove 1 hex head bolt from each side with a socket wrench (10 mm). (1) English - 13