Samsung RF23HSESBSR User Manual Ver.03 (English, French, Spanish) - Page 42

Vegetable & Fruit Drawers, Sparkling Water Model Door Bins

Page 42 highlights

CAUTION After sliding the foldable shelf in and folding it, the Shelf Front can be removed for your convenience. If you use the self without removing the Shelf Front, be careful. The Shelf Front can separate from the rest of the shelf. 4. Vegetable & Fruit Drawers • Tilt up the front of the drawer and pull it straight out. Then, move the drawer slightly in the direction of the arrow and pull it out of the refrigerator. See the illustration below, • Door Bins -- Before removing the drawer, please remove the door bins first as shown below. -- To remove : Simply lift the bin up and pull straight out. • To re-install -- Insert the drawer into the frame rails, and push it back into place. -- Slide each bin in above the desired location, and then push down until it stops. CAUTION The drawers need to be removed before the glass shelf above them can be lifted out. • Sparkling Water Model Door Bins -- To remove : Take the right side of the bin out by lifting it at an angle along the guide, and then take the left side out by pulling it from the door. -- When removing and re-assembling the Bottom Door Bin of the Sparkling Water model, open the Carbonator Cover and tilt the Carbonator towards the front first. English - 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168

CAUTION
After sliding the foldable shelf in and folding it, the
Shelf Front can be removed for your convenience.
If you use the self without removing the Shelf
Front, be careful.
The Shelf Front can separate from the rest of the
shelf.
4. Vegetable & Fruit Drawers
• Door Bins
-
Before removing the drawer, please remove
the door bins first as shown below.
-
To remove : Simply lift the bin up and pull
straight out.
Sparkling Water Model Door Bins
-
To remove : Take the right side of the bin out
by lifting it at an angle along the guide, and
then take the left side out by pulling it from the
door.
-
When removing and re-assembling the Bottom
Door Bin of the Sparkling Water model, open
the Carbonator Cover and tilt the Carbonator
towards the front first.
Tilt up the front of the drawer and pull it
straight out.
Then, move the drawer slightly in the direction
of the arrow and pull it out of the refrigerator.
See the illustration below,
To re-install
-
Insert the drawer into the frame rails, and push
it back into place.
-
Slide each bin in above the desired location,
and then push down until it stops.
CAUTION
The drawers need to be removed before the glass
shelf above them can be lifted out.
English - 42