Samsung RF23HSESBSR User Manual Ver.03 (English, French, Spanish) - Page 22
Operating your French Door, Refrigerator
View all Samsung RF23HSESBSR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Operating your French Door Refrigerator USING THE CONTROL PANEL (1) (4) (13) (2) (14) (5) (3) (6) (12) (10) (11) (9) (7) (8) ( 1 ) Freezer (Power Freezer (3 sec)) The Freezer button serves two purposes: -- To set the Freezer to your desired temperature. -- To turn the power freeze function on and off. 1) To set the Freezer temperature, touch the Freezer button repeatedly. Each time you touch the button, you change the temperature setting. You can set the temperature between 5 °F (-15 °C) and -8 °F (-23 °C) 2) Power Freeze function Touch and hold this button for 3 seconds to decrease the time needed to freeze products in the Freezer. The Power Freeze function can be helpful if you need to quickly freeze easily spoiled items or if the temperature in the freezer has warmed dramatically (For example, if the door was left open). When you use this function, the energy consumption of the refrigerator will increase. Remember to turn it off when you don't need it and return the freezer to your original temperature setting. If you need to freeze large amount of food stuff, activate Power Freeze function at least 20 hours before. ( 2 ) Alarm (Filter Reset (3 sec)) The Alarm button serves two purposes: -- To turn the door open alarm on and off -- To reset the water filter life indicator. 1) Door Alarm Function If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for more than three minutes. The beeping stops when you close the door. The door alarm function is pre-set to On in the factory. You can turn it off by pressing and then releasing the Alarm button. You can turn it back on in the same fashion. The icon lights up when the function is on. When the Door Alarm function is on and the alarm sound is triggered, the Door Alarm Icon will blink while the alarm sounds. 2) Water Filter Life Indicator Function After you replace the water filter, touch and hold this button for 3 seconds to reset the water filter life indicator. When you reset the water filter life indicator, the Filter icon on the panel turns Off. The Filter icon will turn red to let you know it is time to change the water filter after six months (which usually entails about 300 gallons of water usage). Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly. If this is the case in your area, you will have to change the filter more frequently than every six months. English - 22