Samsung SHR-5042 User Manual - Page 22

Selecting live screen mode Each mode can be selected by using the .0%& button and $) to $) buttons. The following figure shows the diagram of changing modes. 4 Split Audio On/Off setting in 4-split mode If you press the &OUFS( ) button in the 4 split mode, the selection cursor appears as shown in the figure below and the corresponding channel is selected. If the "6%*0 button is pressed after selecting a channel, you can set the Audio On/Off function of the corresponding channel. At this time, the audio icon is changed to yellow or white on the corresponding channel according to the Audio On/Off state. .0%& button Auto Sequence PIP  The starting mode is the 4 split screen mode.  Modes except for the full screen can be sequentially selected by using the .0%& button.  Whenever pressing the .0%& button, the mode is switched in the following sequence: [4 Split]  [PIP]  [Auto Sequence]  [4 Split].  You can see the full screen for each channel by selecting the respective buttons of When switching to the full screen from the split screen mode, you can return to the previous split mode screen by pressing the .0%& button. SETTING THE AUDIO ON/OFF From the split mode except for the full screen mode and auto sequence mode, any channel displayed on each split mode can be arbitrarily selected. Also, in live mode, you can activate or deactivate the channels with Audio On settings. Audio On/Off setting in the full screen mode In the full screen mode, the audio function of the selected channel is automatically turned on and you can set the Audio On/Off function by toggling the "6%*0 button. The "VEJP icon is changed to yellow or white on the corresponding channel according to the Audio On/Off state. CAM_01 CAM_02 CAM_03 CAM_04 Channel Seletion & Audio On/Off Setting in PIP mode If you press the &OUFS( ) button in the 4 split mode, the selection cursor appears and the corresponding channel is selected. After selecting a channel, you can enter the channel using the $) to $) buttons and can set the Audio On/Off function as in the 4 split mode by using the "6%*0 button. At this time, the "VEJP icon is changed to yellow or white on the corresponding channel according to the Audio On/Off state. FREEZING AND ZOOMING Freeze function The Freeze function, temporarily stops the video on the current live screen but it is active only in the live mode. You can set the Freeze On/Off function by using the '3&&;& button. 18_ live SHR-5042_Eng.indb 18 2007-06-08 1:24:33