Samsung SHR-5042 User Manual - Page 44
Ptz Device Menu Setup, Preset Setup
View all Samsung SHR-5042 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
;00. The PTZ camera can perform the enlargement/ reduction function by using the 5&-&8*%& button on the front panel in the PTZ device control mode. PTZ DEVICE MENU SETUP In order to enter the PTZ device menu setup mode, first select the channel set with PTZ by pressing the $) to $) buttons on the front panel and press the 15; button. If you enter the single screen PTZ device control mode, the PTZ icon of the screen is changed from the white color to the yellow color. At this time, the PTZ menu setup window appears if the Search( ) button is pressed. PTZ MODEL Samsung Auto Pan Setup P/T SPEED ZOOM SPEED PRESET 12345 6 7 8 9 10 MODEL SELECT Cursor Mode Delete OK 15;.0%&Displays the currently set PTZ model. The function menus shown by the PTZ model are displayed. Each menu allows you to set various PTZ functions. "VUP: This traverses a designated location sequentially from the PRESET 1 to 10. 1BO: If you press "1BO" after setting the positions of two points 'Start' and 'End' from the internal menu of the PTZ camera, this function makes it to come and go repeatedly between two points. The Pan function can be cancelled by pressing "1BO" again. 4FUVQ: Select it either to designate an arbitrary location to the PRESET number or to enter the internal menu screen of the PTZ camera. %FMFUF: This is the function that deletes the entire position information designated for the PRESET 1 to 10. 1541&&% You can set the Pan/Tilt speed of the PTZ camera in step-by-step fashion. After moving the cursor to the 1541&&%, press the &OUFS( ) button and set the speed using the PS button. Escape from the change mode by pressing the &OUFS( ) button again. ;00.41&&% You can set the zoom speed of the PTZ camera in step-by-step fashion. After moving the cursor to the ;00.41&&%, press the &OUFS( ) button and set the speed using the PS button. Escape from the change mode by pressing the &OUFS( ) button again. .0%&4&-&$5 It is used when designating a certain position of the PTZ camera to the PRESET ID or controlling the position of the PTZ camera. By toggling the button, it is switched to "$VSTPS.PEF" "15.PEF", "15 .PEF" "$VSTPS.PEF". $VSTPS.PEF: This shows the state that can move between menus. 15.PEF: This shows the state that can control the Pan, Tilt and Zoom function of the PTZ camera. PRESET SETUP This is the function that saves a desired position of the PTZ camera. It allows storing up to 10 PTZ camera positions. If the Search( ) button is pressed from the single screen PTZ device control mode, the PTZ menu setup window appears. PTZ MODEL Samsung Menu Pan Setup P/T SPEED ZOOM SPEED PRESET 12345 6 7 8 9 10 MODE SELECT Cursor Mode Delete OK 40_ PTZ camera control SHR-5042_Eng.indb 40 2007-06-08 1:25:09