Samsung SHR-5042 User Manual - Page 36

 1PTU
&WFOU Time that an event has occurred Post-Event Section Record the post-conditions from the point that an event has occurred. 
4FDPOET_
.JOVUFT: Set the recording time after the event occurrence.  7JEFP
4J[F Screen setup size displayed on record mode. Video Source NTSC PAL Full D1 Half D1 CIF 704 X 480 704 X 240 352 X 240 704 X 576 704 X 288 352 X 288  If the 1-channel DVR support is set to On in the monitoring menu, the resolution is changed to Full D1. Alarm Detection Setup Alarm Detection Setup Alarm In State Camera Alarm-Out Alarm In 1 N.O 1 None Alarm In 2 N.O 2 None Alarm In 3 N.O 3 None Alarm In 4 N.O 4 None Duration 10 SEC 10 SEC 10 SEC 10 SEC OK Cancel Move/Control Select Exit  4UBUF The Alarm In type can be set to "/0" or "/$". /0
/PSNBMMZ
0QFO : Sensor remains open. But if it gets closed, an alarm is issued. /$
/PSNBMMZ
$MPTFE : Sensor remains closed. But if it gets open, an alarm is issued.  $BNFSB Sets the camera linked to the current Alarm In. The default value is set to the current Alarm In number. At least one link between Alarm In and camera has to be established. Multiple selections are possible. The following screen will appear if the &OUFS( ) button is pressed by moving the cursor from the camera item. Camera 1 Camera 4 Camera 2 All OK Camera 3 Cancel  "MBSN
0VU Sets an alarm-out method when an event has occurred from the Alarm In. Currently, this system supports 2 Alarm Out functions and 1 built-in speaker (beep) output. The following screen will appear if the &OUFS( ) button is pressed by moving the cursor from the Alarm Out item. 1 Beep OK 2 All Cancel  %VSBUJPO Sets the duration for Alarm Out. The alarm sound will be maintained with the value set. $0/5*/6&: The alarm output sound will be maintained until it is cancelled by pressing the "-"3. button manually on the front panel. _
4FDPOET: You can set the duration for the alarm output. 32_ menu setup SHR-5042_Eng.indb 32 2007-06-08 1:24:55