Samsung SHR-5042 User Manual - Page 38

RECORD SCHEDULE The details of the record schedule menu are as follows: Recording Schedule 00 02 04 06 08 10 12 14 16 18 20 22 24 Continuous Motion REC Option 00-01 M:C 00-24 M:C Alarm In Apply All OK You can set the system to automatically record images by setting the desired time frames. Press the &OUFS( ) button after moving the cursor on the camera to be set.  5JNF
4FMFDUJPO In order to select the recording time slot hourly, move the cursor to the part shown as in the figure below and press the &OUFS( ) button. And, select the recording time slot while using the  PS  button. You can exit from the change mode by pressing the &OUFS( ) button again. 00-01  3&$
0QUJPO Sets the recording method. Please see the following table for the types of recording methods. You can apply the preset recording method for the selected time slot if the  PS  button is used after pressing the &OUFS( ) button. "": The recording method can be identically set to a range between zero hour and 24 hours. If you press ""QQMZ
"MM", the values for the current channel are copied to entire channels. Setup Recording Type Recording Support Screen Symbol No Recording NONE Continuous Recording C Motion Recording M C: Continuous M: Motion Alarm In Recording A Continuous & Motion Recording C : M A: Alarm In Continuous & Alarm In Recording C : A Motion & Alarm In Recording M : A Continuous & Motion & Alarm In Recording C : M : A BACKUP The details of the backup menu are as follows: Backup Backup Mode Video (SFX) Start Time 2007-04-03 07:41:20 End Time 2007-04-03 07:43:20 Backup Device USB Camera OK Cancel Move/Control Select Exit This is to back up the video data stored on the HDD to a backup device. 34_ menu setup SHR-5042_Eng.indb 34 2007-06-08 1:24:59