Samsung SP-LSP3BLAXZA User Manual - Page 101
Sound and Noise Issues, How can I connect an audio device to the Projector?
View all Samsung SP-LSP3BLAXZA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Sound and Noise Issues When the Projector has difficulties with sound, these steps may help resolve the problem. How can I connect an audio device to the Projector? The connection method may differ depending on the audio device, such as HDMI (eARC), Bluetooth, and Wi-Fi. For more information about how to connect an audio device, run Connection Guide. • Menu Connected Devices Connection Guide Audio Device There is no sound or the sound is too low at maximum volume. Check the volume control of your Projector, and then check the volume control of the external device (cable box or satellite box, DVD, Blu-ray, etc.) connected to your Projector. Check the cable connection between an external device and the Projector and then try cable connection again. The picture is good but there is no sound. Check the Sound Output setting. If it is set to Projector Speaker, check the volume setting. • Menu Settings All Settings Sound Sound Output Try Now If you are using an external device, check the device's audio output option. For example, you may need to change your cable box's audio option to HDMI if the box connected to your Projector is using an HDMI cable. Reboot the connected device by disconnecting and then reconnecting the device's power cable. With a set-top box or cable box, check the cable connection and reboot the external device. When the symptom persists, contact your service provider. HDMI (eARC) is connected, and there is no sound. It is recommended to set Digital Output Audio Format to Auto if only limited audio format is supported depending on the performance of the connected sound bar or A/V receiver. • Menu Settings All Settings Sound Expert Settings Digital Output Audio Format Auto - 101 -