Samsung SP-LSP3BLAXZA User Manual - Page 118
Running the Accessibility menu functions using Bixby, Accessibility, Voice Guide Settings, Voice Guide
View all Samsung SP-LSP3BLAXZA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
5. Place the focus on Accessibility, and press the Select button to open the menu. 6. The menu will appear with Voice Guide Settings as the first selection. Highlight Voice Guide Settings, and then press the Select button. 7. A menu appears with the options to change Voice Guide, Volume, Speed, Pitch, and Projector Background Volume. 8. Select the menu using the directional buttons, and then press the Select button. The menus are activated when Voice Guide is on. Running the Accessibility menu functions using Bixby This function is available only if Voice Assistant is set to Bixby. ( Privacy Voice Voice Assistant) Try Now Menu Bixby may not be supported depending on the model or geographical area. Settings All Settings General & To use Bixby, the Projector must be set up and tuned and must be connected to the network. You can connect the Projector to the network during the initial setup or do it later through the settings menu. There are many commands you can say to control the Projector. These can be used together with Voice Guide to give you voice input and voice output. You can use the Samsung Smart Remote but the Projector must be connected to the network. To speak a command, press and hold the button (located near the top of the Samsung Smart Remote, directly below the small LED (microphone) and above the directional button) and say the command, and then release the button. The Projector will confirm the command. For example you can: • Turn Voice Guide on Press the button on the Samsung Smart Remote, and then say "Voice Guide on." • Turn High Contrast on Press the button on the Samsung Smart Remote, and then say "High Contrast on." - 118 -