Samsung SP-LSP3BLAXZA User Manual - Page 107
Anynet+ (HDMI-CEC) Issues, What is Anynet+?
View all Samsung SP-LSP3BLAXZA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Anynet+ (HDMI-CEC) Issues When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem. What is Anynet+? You can use the Projector's remote control to control external devices that support Anynet+ (HDMI-CEC) and that are connected to the Projector via an HDMI cable. For example, if a connected external device supports Anynet+, you can have the connected device turn on or off when you turn the Projector on or off. Anynet+ does not work. The connected device is not displayed. Make sure the device is an Anynet+ (HDMI-CEC) device. From the settings menu on the device, check and confirm that the HDMI-CEC option is enabled. From the Projector, check and confirm that the Anynet+ (HDMI-CEC) feature is set to On. • Menu Try Now Settings All Settings Connection External Device Manager Anynet+ (HDMI-CEC) Check and confirm that the device's power cable is securely plugged in. Check the device's HDMI cable connection. Anynet+ (HDMI-CEC) cannot function under specific circumstances. (when the Projector is scanning channels or performing Reset) When connecting or disconnecting an HDMI cable, turn the Projector off and then back on again. I want to start Anynet+. I also want the connected devices to turn on when the Projector is turned on. Move the focus to the Anynet+ device at Menu Connected Devices Sources, press the down directional button to move to Anynet+ (HDMI-CEC), and then press the Select button. Check if the Anynet+ device is properly connected to the Projector, and then select Anynet+ (HDMI-CEC) menu to see if Anynet+ (HDMI-CEC) is set to On. • Menu Try Now Settings All Settings Connection External Device Manager Anynet+ (HDMI-CEC) - 107 -