Sanyo WTC500L Owner's Manual - Page 35
Input Source Selection, Menu Operation, INPUT 1
UPC - 086483074257
View all Sanyo WTC500L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Input Source Selection Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. 2 Use the Point ed buttons to move the red arrow pointer to the desired input and then press the SELECT button. The signal format menu appears. 3 Use the Point ed buttons to select the desired signal format and then press the SELECT button. INPUT 1 RGB (PC analog) When the RGB PC (analog) signal is connected RGB (Scart) When the RGB PC (scart) signal is connected HDMI When the HDMI signal is connected. Input Menu INPUT 2 RGB When the RGB PC signal is connected. Video When the video signal is connected. Component* When the component signal is connected. * If the projector cannot reproduce proper video image, select a system manually (see "Video System Selection" on page 36) *"Component" can accept the component signal and the analog RGB signal. Some unsupported RGB signals may be detected to component signals. In this case, please set to "RGB"manually. INPUT 3 Video* When the video signal is connected. S-video* When the S-video signal is connected. * If the projector cannot reproduce proper video image, select a system manually (see "Video System Selection" on page 36). Input Selection 35