Sanyo WTC500L Owner's Manual - Page 77

Appendix Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally. Indicators POWER green / red WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP 1/2 REP. yellow Projector Condition The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode. Press the ON/STAND- red ✽ ✽ ✽ ✽ BY button to turn on the projector. ✽ ✽ green The projector is operating normally. ✽ (The Shutter is open) ✽ green ✽ red ✽ red The projector is operating normally. ✽ ✽ (The Shutter is closed) The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be ✽ ✽ ✽ turned on until cooling is completed and the POWER indicator lights red. The projection lamp is being cooled down in the Power ✽ ✽ management mode. ✽ ✽ green ✽ ✽ red ✽ ✽ green ✽ The projector is in the Power management mode. The projection lamp is being cooled down in the Shutter ✽ management mode. The projector is in the Shutter management mode. Press ✽ the ON/STAND-BY button to turn on the projector. ✽ ✽ ✽ ✽ Fig.1 Filter replacement icon and "Please wait..." The filter is scrolled using the Filter control function in the setting menu. When the filter is being scrolled, the Filter replacement icon and" Please wait..." message (Fig. 1) appear on the screen. • • • on off • • • b linking at the normal rate (approx. 1 second ON, 1 second OFF) • • •blinking fast (approx. 0.5 seconds ON, 0.5 seconds OFF) • • • b linking slow (approx. 2 seconds ON, 2 seconds OFF) Differs according to conditions. 77