Sanyo WTC500L Owner's Manual - Page 79

Appendix The projector is detecting abnormal condition. Indicators POWER green / red WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP 1/2 REP. yellow Projector Condition ✽ ✽ ✽ Fig.2 Filter replacement icon Fig.3 ✽ If the Filter counter reached a time set in the timer setting, a Filter replacement icon (Fig.2) appears on the screen and the WARNING FILTER indicator on the top panel lights up. Replace the filter as soon as possible. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 3 appears on the screen and the WARNING FILTER indicator lights up. Replace the filter cartridge as soon as possible. If the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement icon (Fig.4) appears on the screen and the WARNING FILTER indicator lights up. Replace the filter cartridge as soon as possible. Fig.4 Filter cartridge replacement icon ✔Note: •Fig.2, Fig.3 and Fig.4 icon will not appear when the Display function is set to "Off" (p.56), or during "Freeze" (p.30). The filter cartridge is not installed in the projector. Check ✽ ✽ the filter compartment to see if the filter cartridge is installed in the projector. green ✽ The projector detects an abnormal condition during filter ✽ ✽ scroll. red ✽ The projection is being cooled down after detecting an ✽ ✽ abnormal condition during filter scroll. ✽ red The projector has been cooled down enough and is in ✽ ✽ the stand-by mode after detecting an abnormal condition during filter scroll ✽ ✽ The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned ✽ off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard. ✽ ✽ ✽ ✽ red ✽ red ✽ The shutter is out of control. The shutter is out of control. (The projector is in the ✽ cooling mode.) The shutter is out of control. (The projector is in the ✽ stand-by mode.) In that case, contact the service station immediately. 79