Sanyo WTC500L Owner's Manual - Page 56
Display, Standby mode, Power management
UPC - 086483074257
View all Sanyo WTC500L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Setting Display This function decides whether to display On-Screen Displays. On Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option. Countdown Off Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off Hide the On-Screen Displays except; ● On-Screen Menu ● "Power off?" (p.25) ● "No signal" for Power management (p.57) ● "Please wait ..." ● Arrows for panning mode(p.47) Display Use the Point 7 8 buttons to switch between the options. Standby mode This function is available when operating the projector via network. Normal ....... S upply the power to the network function even after turning off the projector. You can turn on/ off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off. Eco Select "Eco" when you do not use the projector via network. The projector's network function will stop when turning off the projector. ✔Note: • W hen selecting "Normal", the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off. • W hen "Eco" is selected, several functions will be restricted. (pp. 17, 2022, 55, 57) • When "Eco" is selected, all of the infrared remote receivers are activated regardless of the RC sensor setting. The projector may be effected the noise of the fluorescent light and so on. Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period. If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with "No signal" appears. It starts the countdown until the lamp is turned off. The countdown time can be set between 1-30 minutes. Use the Point 7 8 buttons to set the countdown timer. Power management Time left before the lamp is off. 56