Sanyo WTC500L Owner's Manual - Page 78
Indicators, Appendix, The projector is detecting abnormal condition°
UPC - 086483074257
View all Sanyo WTC500L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Appendix The projector is detecting abnormal condition. Indicators POWER green / red WARNING WARNING TEMP. FILTER red orange SHUTTER blue LAMP 1/2 REP. yellow Projector Condition green The temperature inside the projector is elevated close to ✽ ✽ ✽ the abnormally high level. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to ✽ ✽ ✽ normal, the POWER indicator lights red and the projector red can be turned on. (The WARNING TEMP. indicator keeps blinking.) Check and replace the filter. The projector has been cooled down enough and the red ✽ ✽ ✽ temperature returns to normal. When turning on the projector, the WARNING TEMP. indicator stops blinking. Check and replace the filter. ✽ ✽✽ red The lamp cannot light up. (The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.) ✽ ✽ ✽ red The lamp cannot light up. (The lamp has been cooled down enough and the projector is in stand-by mode and ready to be turned on with the ON/STAND-BY button.) ✽ ✽ ✽ green ✽ ✽ ✽ ✽ When either of the 2 lamps is out. The lamp has been used overtime. Replace the lamp immediately. WARNING FILTER When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.65). LAMP 1/2 REPLACE When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light yellow, replace the projection lamps with new ones promptly. See pages 53-54, 66- 68. 78