Sharp AL 800 AL-800 AL-840 Operation Manual - Page 16
Power To Copier - supplies
UPC - 074000072930
View all Sharp AL 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Side to be printed LOADING COPY PAPER Paper support Paper guide 2 4 Make sure the paper release lever is pushed back. The paper will be clamped by the paper feed roller inside the copier. Installation When placing special paper or several sheets of paper or when making twosided copies, the paper may not be clamped inside the copier even if the paper release lever is pushed back. In this case, repeat the paper release lever operation several times to make sure that the paper is clamped. POWER TO COPIER 1 Ensure that the power switch of the copier is in the OFF position. Insert the attached power cord into the power cord socket at the rear of the copier. If you use the copier in a country other than the country where the copier was purchased, you will need to make sure that the local power supply is compatible with your model. If you plug the copier into an incompatible power supply, irreparable damage to the copier will result. 15