Sharp AL 800 AL-800 AL-840 Operation Manual - Page 33
Original table and original cover, Cleaning the drum cartridge
UPC - 074000072930
View all Sharp AL 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
USER MAINTENANCE Original table and original cover Dirt or stains on the glass or cover will also be copied. Wipe the glass and the cover with a soft, clean cloth. If necessary, dampen the cloth with water or a glass cleaner. Original table Original cover Cleaning the drum cartridge If some parts of the images are missing from the printed page, you may need to clean the surface of the drum in the drum cartridge. Because the drum surface is very sensitive, you 5 must take extreme care when cleaning it, otherwise it may become damaged, and any damage to this component will have a serious effect on the print quality. Follow the procedure below to clean the drum surface. 1 Turn off the copier power. Supplies and user maintenance 2 Remove the TD cartridge. To remove the TD cartridge, see page 28, step 3. 3 Remove the drum cartridge. To remove the drum cartridge, see page 29, DRUM CARTRIDGE REPLACEMENT. Put the drum cartridge down on a clean, uncluttered and level surface. The drum can easily become damaged if it is not handled with care. 4 Take a sheet of clean paper and roll it into a tube. Roll it tightly so that the diameter of the hole at each end is less than the thickness of your little finger. 32