Sharp AL 800 AL-800 AL-840 Operation Manual - Page 30

Drum Cartridge Replacement

Page 30 highlights

TD CARTRIDGE REPLACEMENT 4 Grasp the handle of the cartridge and pull the cartridge clear of the copier. Dispose of the old TD cartridge in accordance with local regulations. 5 Install a new TD cartridge. To install the new cartridge, see page 12, INSTALLING THE TD CARTRIDGE. 6 Close the front cover and turn on the copier power. The indicator will go out and the ready ( ) indicator will light up. Supplies and user maintenance DRUM CARTRIDGE REPLACEMENT 5 The useful life of the drum cartridge is approximately 20,000 copies. When the internal counter reaches approximately 19,000 copies, the drum replacement required ( ) indicator will light up indicating that replacement of the drum cartridge will be needed soon. For information on purchasing drum cartridges, see SUPPLY PART NUMBERS AND STORAGE on page 44. When the indicator begins to blink, the copier will stop operating until the cartridge is replaced. Replace the drum cartridge at this time. 1 Place some scrap paper on a nearby level surface. 2 Turn off the copier power. 3 Push gently on both sides of the front cover to open the cover. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51

29
5
Supplies and user maintenance
4
Grasp the handle of the cartridge and pull the cartridge clear of the copier. Dispose of
the old TD cartridge in accordance with local regulations.
5
Install a new TD cartridge. To install the new cartridge, see page 12,
INSTALLING
THE TD CARTRIDGE
.
6
Close the front cover and turn on the copier power. The
indicator will go out and the
ready (
) indicator will light up.
DRUM CARTRIDGE REPLACEMENT
The useful life of the drum cartridge is approximately 20,000 copies. When the internal counter
reaches approximately 19,000 copies, the drum replacement required (
) indicator will light
up indicating that replacement of the drum cartridge will be needed soon. For information on
purchasing drum cartridges, see
SUPPLY PART NUMBERS AND STORAGE
on page 44.
When the indicator begins to blink, the copier will stop operating until the cartridge is replaced.
Replace the drum cartridge at this time.
1
Place some scrap paper on a nearby level surface.
2
Turn off the copier power.
3
Push gently on both sides of the front cover to open the cover.
TD CARTRIDGE REPLACEMENT