Sharp AL 800 AL-800 AL-840 Operation Manual - Page 41

TROUBLESHOOTING 6 Problem Half of the page is blank.*1 Thank you very much for buying a SHARP laser printer. This manual tells you how to set up, operate and maintain your new printer, and contains advice on how to get the best performance from the printer. The descriptions contained in this manual assume that you are familiar with the operation of your computer and with how to send files to be printed. Please use this manual along with the documentation for your computer hardware and software. Your new printer has been specially designed to give you high-quality, trouble-free printing performance. The printer driver software lets the printer communicate with your computer via an IEEE P1284 bidirectional parallel interface, so you can control all aspects of printing from the Windows Printer control panel on your computer screen. Printing speed is a maximum Possible cause Solution The page layout is too complex. Simplify the page layout to reduce required memory. Resolution is set to 600 dpi. Set resolution to 300 dpi. Page orientation setting may Change the page orientation with the be incorrect. printer driver. There may be too many applications open. Close all unnecessary applications before printing. The paper in the tray may be Load the correct paper into the larger than the paper size paper tray. specified in your application or printer driver. Interface cable specifications may be incorrect. Use the interface cable included with the AL-840. The CPU specifications may Check that the CPU of your be incorrect. computer is 486DX 66 MHz or better. The computer may have Install more random-access memory insufficient random-access (RAM) in your computer. memory (RAM). See page: - - - - - - - - *1 The problem occurs only if the copier is used as a printer. (AL-840 only) See also the printer operation manual. Copier trouble? 40