Sharp AL 800 AL-800 AL-840 Operation Manual - Page 34
When copier is not in use - toner
UPC - 074000072930
View all Sharp AL 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
USER MAINTENANCE 5 Gently rub the surface of the drum (green portion) with the rolled-up paper to remove any particles of toner caking on the drum. q Do not touch the drum surface with the edges of rolled-up paper. q Do not let the drum surface come into contact with anything other than the rolled-up paper. Fingerprints, water, alcohol and other solvents will damage the drum surface. 6 Replace the drum cartridge. (See page 29, DRUM CARTRIDGE REPLACEMENT.) 7 Replace the TD cartridge. (See page 28, TD CARTRIDGE REPLACEMENT.) 5 8 Close the front cover and turn on the copier power. When copier is not in use To prevent entry of dust and foreign matter, store the copier as follows. 1 Remove the power cord and the interface cable (AL-840 only) and secure the copier using tape (two locations). Supplies and user maintenance If this copier is not in use for a long time, remove the copy paper from the paper tray and store it in a location that is not humid. If the copy paper is left in the paper tray for a long time, it will absorb moisture, resulting in paper misfeeds. 33