Sharp PG-B10S Operation Manual - Page 51

If you want to change the keycode, follow the procedure below. If you want to clear the keycode input box, follow the procedure below. MKeycode input box Note • When "Anti-Theft" is selected, the password in- put box will appear. After the password has been entered, you can change the keycode. 1 Press the buttons on the remote control or the projector to enter the preset 4-digit keycode in "Old Code". 2 Press any button you like on the re- mote control or the projector to enter the new keycode. 3 Enter the same 4-digit keycode in "Reconfirm". Note • If you do not want to set a keycode, leave the keycode field blank in steps 2 and 3 and press . Note • When "Anti-Theft" is selected, the keycode in- put box will appear. • If no keycode is entered, the image will not be displayed, even if the projector receives the input signal. 1 Press on the remote control or on the projector to turn on the projector. 2 Enter the keycode you set when the keycode input box is displayed. Note • When entering the keycode, press the buttons previously set on the projector or the remote control. Using the Menu -47