Sharp PG-B10S Operation Manual - Page 57
Connecting to Component, Video Equipment, video equipment using the 3
UPC - 074000364080
View all Sharp PG-B10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Connecting to Component Video Equipment Use a 3 RCA to 15-pin D-sub cable when connecting to the INPUT 1 terminal, component video equipment such as DVD players and DTV* decoders. *DTV is the umbrella term used to describe the new digital television system in the United States. 1 Connect the projector to the video equipment using the 3 RCA to 15-pin D-sub cable. • Secure the connectors by tightening the thumbscrews. 2 Connect the projector to the video equipment using a ø3.5 mm minijack to RCA audio cable (commercially available). Optional cable 3RCA to 15-pin D-sub cable AN-C3CP (9'10" (3.0 m)) To analog component output terminal To audio output terminal DVD player or DTV* decoder 1 3 RCA to 15-pin D-sub cable (sold separately) 2 ø3.5 mm minijack to RCA audio cable (commercially available) Note • If the projector does not automatically detect a COMPONENT signal, the projected image will appear distorted. To correct, change the menu setting from "Auto" to "Component". The menu setting can be found in the "Picture" menu. See page 38. • A ø3.5 mm minijack to RCA audio cable (commercially available) is required for audio input. Connections -53