Sharp PG-B10S Operation Manual - Page 72
Connecting Pin Assignments
UPC - 074000364080
View all Sharp PG-B10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Connecting Pin Assignments INPUT 1 and OUTPUT RGB Signal Terminal: 15-pin Mini D-sub female connector 10 6 5 1 15 11 RGB Input 1. Video input (red) 2. Video input (green/sync on green) 3. Video input (blue) 4. Not connected 5. Not connected 6. Earth (red) 7. Earth (green/sync on green) 8. Earth (blue) 9. Not connected 10. GND 11. Not connected 12. Bi-directional data 13. Horizontal sync signal: TTL level 14. Vertical sync signal: TTL level 15. Data clock Component Input 1. PR (CR) 2. Y 3. PB (CB) 4. Not connected 5. Not connected 6. Earth (PR) 7. Earth (Y) 8. Earth (PB) 9. Not connected 10. Not connected 11. Not connected 12. Not connected 13. Not connected 14. Not connected 15. Not connected RS-232C Terminal: 9-pin Mini DIN female connector 8 Pin No. 1 Signal Name 9 7 2 RD Receive Data 3 SD Send Data 4 5 SG Signal Ground 6 6 3 7 RS 8 CS 9 5 4 2 1 DIN-D-sub RS-232C adaptor: 9-pin D-sub male connector 1 5 69 Pin No. 1 2 3 4 5 6 7 8 9 Signal RD SD SG RS CS Name Receive Data Send Data Signal Ground I/O Input Output Reference Not connected Connected to internal circuit Connected to internal circuit Not connected Connected to internal circuit Not connected Connected to Pin 8 Connected to Pin 7 Not connected I/O Input Output Reference Not connected Connected to internal circuit Connected to internal circuit Not connected Connected to internal circuit Not connected Connected to internal circuit Connected to internal circuit Not connected Note • Pin 8 (CS) and Pin 7 (RS) are short circuited inside the projector. RS-232C Cable recommended connection: 9-pin D-sub female connector 5 1 96 Pin No. 1 2 3 4 5 6 7 8 9 Signal CD RD SD ER SG DR RS CS CI Pin No. 1 2 3 4 5 6 7 8 9 Signal CD RD SD ER SG DR RS CS CI Note • Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g. PC). Projector PC Pin No. 4 5 6 Pin No. 4 5 6 -68