Sharp PG-B10S Operation Manual - Page 66
Remove the air filter., Replace the filter cover., User service screw
UPC - 074000364080
View all Sharp PG-B10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Replacing the Air Filter 4 Remove the air filter. • Pick the air filter up with your fingers and lift it out of the filter cover. 5 Clean the air filter. • Clean the dust off the air filter and cover with a vacuum cleaner extension hose. 6 Replace the air filter. • Place the air filter underneath the tabs on the filter cover. 7 Replace the filter cover. • Align the tab on the filter cover and place it while pressing the tab to close it (1). Then tighten the user service screw (2) to secure the filter cover. Tab 1 Note • Be sure the filter cover is securely installed. The power will not turn on unless it is correctly installed. • If dust or dirt has collected inside the rear and bottom air filters (not removable), clean the filter with a vacuum cleaner extension hose. -62 2 User service screw