Sharp PG-B10S Operation Manual - Page 65
Replacing the Air Filter, Cleaning and Replacing the Air Filter, Cleaning and Replacing
UPC - 074000364080
View all Sharp PG-B10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Replacing the Air Filter • This projector is equipped with air filters to ensure the optimal operating condition of the projector. • The air filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. • Ask your nearest Sharp Authorized Projector Dealer or Service Center to exchange the filter (PFILDA010WJZZ) when it is no longer possible to clean. Cleaning and Replacing the Air Filter 1 Press on the projector STANDBY or on the remote control to put the projector into the standby mode. • Wait until the cooling fan stops. " Bottom view " Front view Air filter (removable) Air filter (not removable) STANDBY button STANDBY STANDBY button 2 Disconnect the power cord. • Unplug the power cord from the AC socket. AC socket 3 Remove the filter cover. • Turn the projector over. Loosen the user service screw (1) that secures the fil- ter cover. Pressing the tab, remove the filter cover (2). 1 2 Tab User service screw Appendix -61