Sharp XR-50S XR-55S XR-55X Operation Manual - Page 49
Setting the Video System, Setting the Video Setup, Checking the Input Signal
View all Sharp XR-50S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Menu operation n Page 39 4 Setting the Video System 6 Checking the Input Signal The video input system mode is factory preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the Video signal difference. In that case, switch the Video signal. Selectable items Auto PAL SECAM *NTSC4.43 NTSC3.58 PAL-M PAL-N PAL -60 * When reproducing NTSC signals in PAL video equipment. This function allows you to check the current input signal information. Note • The Video signal can only be set in S-VIDEO or VIDEO mode. • When "Video System" is set to "Auto", you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal. 5 Setting the Video Setup Selectable items 0 IRE 7.5 IRE Description Sets the black level to 0 IRE. Sets the black level to 7.5 IRE. Note • This function is available for the following signals. With COMPUTER/COMPONENT input: - 480I With S-VIDEO or VIDEO input: - NTSC3.58 Useful Features 45