Sharp XR-50S XR-55S XR-55X Operation Manual - Page 74

Specifications Model Display devices Resolution Lens F number Zoom Focus Input terminals Computer/Component (mini D-sub 15 pin) S-Video (mini DIN 4 pin) Video (RCA) Audio (ø3.5 mm stereo minijack) Audio (RCA) Output terminals Computer/Component (mini D-sub 15 pin) Control and USB (Type B) communication terminals RS-232C (mini DIN 9 pin) Speakers Projection lamp Rated voltage Rated frequency Input current Power consumption Eco+Quiet AC 100 V Off AC 240 V Eco+Quiet AC 100 V On AC 240 V Power consumption (STANDBY Mode) Quick Start AC 100 V AC 240 V Eco AC 100 V AC 240 V Operation temperature Cabinet Dimensions (main body only) [W × H × D] Weight (approx.) XR-55X XR-50S 0.55" DLP® Chip ×1 XGA (1024 × 768) SVGA (800 × 600) F 2.4 - 2.6 Manual, ×1.20 (f = 19.0 - 22.7 mm) Manual ×2 ×1 ×1 ×1 ×1 (L/R) ×1 ×1 ×1 7W (Mono) 210 W AC 100 - 240 V 50/60 Hz 2.8 A 274 W 265 W 215 W 210 W xxx W xxx W xxx W xxx W 41ºF to 95ºF (+5ºC to +35ºC) Plastic 11 52/64" × 3 1/8" × 9 19/64" (300 × 79 × 236 mm) 6.2 lbs. (2.8 kg) As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. This SHARP projector uses a DLP® chip. This very sophisticated panel contains 786,432 (XR55X)/480,000 (XR-50S) pixels (micromirrors). As with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to. This unit has some inactive pixels within acceptable tolerances which may result in inactive dots on the picture screen. This will not affect the picture quality or the life expectancy of the unit. 70