Sharp XR-50S XR-55S XR-55X Operation Manual - Page 50
Adjusting the Projected Image SCR-ADJ Menu
View all Sharp XR-50S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Adjusting the Projected Image ("SCR-ADJ" Menu) Pict. SIG SCR-ADJ PRJ1 PRJ2 1 Resize 2 Image Shift 3 Keystone 4 Overscan 5 OSD Display 6 Closed Caption 7 Background 8 Setup Guide 9 PRJ Mode 0 Wall Color Normal 0 0 On On Off Logo On Front Off Language English SEL./ADJ. ENTER END Menu operation n Page 39 1 Setting the Resize Mode Use this function to stretch the image vertically or horizontally or when the edges of the image cannot be seen. Note • For details of the Resize mode, see pages 30 and 31. • You can also press RESIZE on the remote control to set the Resize mode. (See page 30.) 3 Keystone Correction When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. Select "Keystone" on the "SCR-ADJ" menu and adjust with the slide bar. See page 28 for details of Keystone Correction. Q button O button 2 Adjusting the Image Position You can move the projected image vertically. O button Q button Note • The Keystone Correction can be adjusted up to an angle of approximately ±40(XR-55X)/ ±20(XR-50S) degrees. • You can also press KEYSTONE on the remote control to adjust Keystone Correction. Note • This function only works in some Resize modes. (See pages 30 and 31.) 46