Sharp XR-50S XR-55S XR-55X Operation Manual - Page 56

Adjusting the Projector Function ("PRJ-ADJ1/2" Menu) (Continued) Menu operation n Page 39 STANDBY Mode When set to "Eco", power consumption is reduced in Standby mode. Selectable items Description Eco The monitor output and RS-232C are switched off in Standby mode. Quick Start The monitor output and RS-232C are activated even if the projector is in Standby mode. DLP® LinkTM (XR-55X only) See the Operation Manual for Stereoscopic 3D Projection provided separately. DLP® LinkTM Invert (XR-55X only) See the Operation Manual for Stereoscopic 3D Projection provided separately. Checking the Lamp Life Status You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). Lamp usage condition Remaining lamp life "Life" 100% 5% Operated exclusively with "Eco+Quiet" set to "On" Approx. Approx. 4,000 hours 200 hours Operated exclusively with "Eco+Quiet" set to "Off" Approx. Approx. 2,000 hours 100 hours Note • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. • The lamp life may vary depending on the usage condition. Returning to the Default Settings This function allows you to initialize the settings you have made in the projector. Note • The following items or menu cannot be initialized. - Resolution - Language - Lamp Timer (Life) - System Lock 52