Singer One Instruction Manual 2 - Page 27
down,lightly
View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
25 To Remove the Work Let the thread take-up lever rest at its highest point, raise the presser foot and draw the fabric back and to the left about two inches; pass the threads over the thread cutter (A, Fig. 23) and pull down,lightly to sever them. Leave the ends of the threads under the presser foot. Tensions For ordinary stitching, the needle and bobbin threads should be locked in the centre of the thickness of the material, thus: FIG. 24. PERFECT STITCH If the tension on the needle thread is too tight, or if that on the bobbin thread is too loose, the needle thread will lie straight along the upper surface of the material, thus: E11.318 FIG. 25. TIGHT NEEDLE THREAD TENSION If the tension on the bobbin thread is too tight, or if that on the needle thread is too loose, the bobbin thread will lie straight along the under side of the material, thus: I EII319 FIG. 26. LOOSE NEEDLE THREAD TENSION