Singer One Instruction Manual 2 - Page 48
gathering.
View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
46 To Make a Ruffle and Sew it to a Garment in One Operation Insert the material to be ruffled between the two blue blades, as shown in Fig. 44, following the line 1. 1 FIG. 44 2, in Fig. 42. Place the garment to which the ruffle is to be attached, under the separator blade, following the line 1, in Fig. 42. Proceed the same as for gathering. The edge of the ruffled seam can be bound by using the binder. To Ruffle and Sew on a Facing in One Operation Insert the material to be ruffled between the two blue blades, following the line 2, in Fig. 42. Place the garment to which the ruffle is to be attached, under the separator blade, following the line 1, in Fig. 42. Place the material for the facing over the upper blue blade, as shown in Fig. 45, following the line 3, in Fig. 42. The facing may be straight or bias material. If the facing is to be on the right side of the garment, place the garment and