Singer Pixie Plus the crafting machine by SINGER Instruction Manual - Page 20

Troubleshooting

Page 20 highlights

TROUBLESHOOTING PROBLEM PROBLEM CAUSE No power or machine runs slowly Batteries installed incorrectly; Batteries are low; Adaptor power inadequate AMENDMENT Reinstall the batteries making sure they are correctly inserted; Use new batteries; Use compatible adaptor Skipping stitches Needle eye not centered; Needle is bent; Presser foot is too loose Remove and re-insert the needle with the flat side of the needle to the back; Remove and re-insert a new needle; Tighten the presser foot Bobbin thread cannot Bobbin is empty; be drawn up Needle is threaded incorrectly Replace with full bobbin; Rethread the needle making sure it is threaded from front to back Thread keeps breaking Needle is bent; Needle shank not properly seated; Thread tension dial or thread guide are too tight Remove and re-insert new needle; Remove and re-insert new needle; Loosen the thread tension to a setting between 3-5 Stitches too loose or uneven Threads are caught; Upper thread is too loose or too tight Rethread the upper thread and bobbin Needle breaks Needle bent or defective Remove and re-insert new needle Correct Disposal of This Product This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health for uncontrolled waste disposal, recycle it responsibly to promote sustainable reuse of material resources. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

20
TROUBLESHOOTING
PROBLEM
PROBLEM CAUSE
AMENDMENT
No power or machine
runs slowly
Batteries installed incorrectly;
Batteries are low;
Adaptor power inadequate
Reinstall the batteries making
sure they are correctly inserted;
Use new batteries;
Use compatible adaptor
Skipping stitches
Needle eye not centered;
Needle is bent;
Presser foot is too loose
Remove and re-insert the needle with
the flat side of the needle to the back;
Remove and re-insert a new needle;
Tighten the presser foot
Bobbin thread cannot
be drawn up
Bobbin is empty;
Needle is threaded incorrectly
Replace with full bobbin;
Rethread the needle making
sure it is threaded from front
to back
Thread keeps breaking
Needle is bent;
Needle shank not properly seated;
Thread tension dial or
thread guide
are too tight
Remove and re-insert new needle;
Remove and re-insert new needle;
Loosen the thread tension to a
setting between 3-5
Stitches too loose
or uneven
Threads are caught;
Upper thread is too loose or
too tight
Rethread the upper thread and bobbin
Needle breaks
Needle bent or defective
Remove and re-insert new needle
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other household
wastes.
To prevent possible harm to the environment or human health for uncontrolled
waste disposal, recycle it responsibly to promote sustainable reuse of material resources.