Sony DCR-TRV39 Operating Instructions (primary manual) - Page 66
Using the viewfinder
View all Sony DCR-TRV39 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Using the viewfinder Turn the LCD panel over and move it back to your camcorder body with the LCD screen facing out. You can operate with the touch panel using the viewfinder. Use the viewfinder when operating camera brightness and fader on the touch panel. The POWER switch should be set to or . Operate by touching the panel. (1) Turn the LCD panel over and move it back to your camcorder body with the LCD screen facing out. (2) Press OFF. The PANEL OFF indicator appears on the screen. (3) Press OK. The LCD screen is turned off. (4) Using the viewfinder, press the LCD screen. EXPOSURE, OK, ON and FADER (only when the POWER switch is set to CAMERA) appear. (5) Press the LCD screen and select a desired item, then press OK. EXPOSURE: Adjust the exposure by pressing -/+. FADER: Press FADER until a desired fader mode appears. The indicator changes as follows: FADER t M. FADER t BOUNCE t MONOTONE (no indicator) T DOT T WIPE T OVERLAP ON: The LCD screen lights up. 4 When the POWER switch is set to CAMERA EXPO- SURE ON OK FADER When the POWER switch is set to MEMORY EXPO- OK SURE ON Viewfinder To make the buttons on the LCD screen disappear Press OK. 66