Sony DCR-TRV39 Operating Instructions (primary manual) - Page 90
Audio dubbing
View all Sony DCR-TRV39 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Audio dubbing You can record additional audio to the original sound on the tape by connecting audio equipment or a microphone. If you connect the audio equipment, you can add sound to the tape already recorded in the 12-bit mode by specifying starting and ending points. The original sound will not be erased. Preparing for audio dubbing You can record additional audio in the following: •Dubbing with the built-in microphone •Connecting the microphone (optional) to the MIC jack •Connecting the microphone (optional) to the intelligent accessory shoe •Connecting the A/V connecting cable to the AUDIO/VIDEO jack The audio input to be recorded will take precedence over others in the following order: •MIC jack •Intelligent accessory shoe •AUDIO/VIDEO jack •Built-in microphone Dubbing with the built-in microphone No connection is necessary. If no external microphone (optional) is connected, sound is recorded via the built-in microphone. Connecting the microphone (optional) to the MIC jack MIC (PLUG IN POWER) jack MIC (PLUG IN POWER) jack : Signal flow Microphone (optional) You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack to a TV. The recorded sound is not output from a speaker. Check the sound by using the headphones or TV. 90