Sony DCR-TRV39 Operating Instructions (primary manual) - Page 87
When you have finished dubbing the tape, Before operation for connecting with the A/V connecting cable
View all Sony DCR-TRV39 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Editing Recording video or TV programs Recording video or TV programs Before operation for connecting with the A/V connecting cable Set DISPLAY in to LCD in the menu settings when using the A/V connecting cable. (The default setting is LCD.) The POWER switch should be set to . Operate by touching the panel. (1) Insert the blank tape (or the tape you want to record over) into your camcorder. If you are recording the tape from the VCR, insert the recorded tape into the VCR. (2) Press FN and select PAGE3. (3) Press REC CTRL. REC CTRL RET. REC PAUSE REC START (4) Press REC PAUSE. (5) Press N on the VCR to start playback if you record the tape from a VCR. Select a TV program if you record from a TV. The picture from playback side appears on the screen. (6) Press REC START at the scene where you want to start recording from. When you have finished dubbing the tape Press x on your camcorder, and then press the stop button on the VCR. If your VCR is a monaural type Connect the yellow plug of the A/V connecting cable to the video output jack and the white or the red plug to the audio output jack on the VCR or the TV. When the white plug is connected, the left channel audio is output, and when the red plug is connected, the right channel audio is output. If your VCR has an S video jack See page 44 for details. When using the i.LINK cable •Before recording, make sure if the DV IN indicator appears on the screen. The DV IN indicator may appear on both equipment. •Recording of only the picture or sound cannot be done. 87