Sony DG910 Instructions Manual - Page 59
SUR POS., Surround speaker position, CRS. FREQ Speaker crossover, frequency, DIMMER Brightness of
UPC - 027242707023
View all Sony DG910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Amplifier Operations x SUR POS. (Surround speaker position) Lets you specify the location of your surround speakers for proper implementation of the surround effects in the CINEMA STUDIO EX modes (page 63). This parameter is not available when the surround speakers are set to "NO" (page 48). • SIDE/LO Select if the location of your surround speakers corresponds to sections A and C. • SIDE/HI Select if the location of your surround speakers corresponds to sections A and D. • BEHD/LO Select if the location of your surround speakers corresponds to sections B and C. • BEHD/HI Select if the location of your surround speakers corresponds to sections B and D. Tip Surround speaker position is designed specifically for implementation of the CINEMA STUDIO EX modes. For other sound fields, speaker position is not so critical. Those sound fields were designed under the premise that the surround speakers would be located behind the listening position, but presentation remains fairly consistent even with the surround speakers positioned at a rather wide angle. However, if the speakers are pointing toward the listener from the immediate left and right of the listening position, the surround effects become unclear unless set to "SIDE/LO" or "SIDE/HI". Nevertheless, each listening environment has many variables, such as wall reflections, and you may obtain better results using "BEHD/HI" if your speakers are located high above the listening position, even if they are located to the immediate left and right. Therefore, although it may result in a setting contrary to the above explanation, we recommend that you play back multi channel surround encoded software and select the setting that provides a good sense of spaciousness and that best succeeds in forming a cohesive space between the surround sound from the surround speakers and the sound of the front speakers. If you are not sure which sounds best, select "BEHD/LO" or "BEHD/HI" and then use the speaker distance parameter and speaker level adjustments to obtain proper balance. x CRS. FREQ (Speaker crossover frequency) Lets you set the bass crossover frequency of the speakers that have been set to "SMALL" in the SYSTEM menu. This parameter is only available when at least one speaker is set to "SMALL". Note This parameter is not available when "CAL LOAD" is set to "LOAD YES" in A. CAL menu. In this case, set to "LOAD NO". x DIMMER (Brightness of the display) Lets you adjust the brightness in 3 steps. 59US