Sony DG910 Instructions Manual - Page 94
COAX IN, OPT IN or HDMI IN for, unbalanced or reversed.
UPC - 027242707023
View all Sony DG910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
There is no sound from one of the front speakers. • Connect a pair of headphones to the PHONES jack to verify that sound is output from the headphones. If only one channel is output from the headphones, the component may not be connected to the receiver correctly. Check that all the cords are fully inserted into the jacks on both the receiver and the component. If both channels are output from the headphones, the front speaker may not be connected to the receiver correctly. Check the connection of the front speaker which is not outputting any sound. • Make sure you have connected to both the L and R jacks of an analog component, and not only to either the L or R jack. Use an audio cord (not supplied). There is no sound from analog 2 channel sources. • Check that the INPUT MODE is not set to "COAX IN", "OPT IN" or "HDMI IN" for the selected input (page 78). There is no sound from digital sources (from COAXIAL or OPTICAL input jack). • Check that the INPUT MODE is not set to "ANALOG" or "HDMI IN" (page 78). • Check that the ANALOG DIRECT function is not selected. • Check that the DIGITAL ASSIGN function is not used to reassign the audio input of another source to the selected input (page 79). There is pop noise from a specific component connected to this receiver when you turn on the component. • Check that the INPUT MODE is not set to "AUTO IN" for the selected input (page 78). The source sound input from the HDMI jack on the receiver is not output from the receiver or TV speaker. • Check the setting of HDMI AUDIO in the VIDEO menu (page 55). • Check the HDMI connection. • The sound is not output when the amplifier menus are displayed on the TV screen. In this case, set "OSD" in VIDEO menu to "OSD OFF". • You cannot listen to the Super Audio CD by connecting HDMI. • Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component. The left and right sounds are unbalanced or reversed. • Check that the speakers and components are connected correctly and securely. • Adjust the balance parameters using the LEVEL menu. There is severe hum or noise. • Check that the speakers and components are connected securely. • Check that the connecting cords are away from a transformer or motor, and at least 10 feet away from a TV set or fluorescent light. • Move your audio components away from the TV. • The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. There is no sound, or only a very lowlevel sound is heard from the center/ surround/surround back speakers. • Select a CINEMA STUDIO EX mode (page 63). • Adjust the speaker level (page 39). • Make sure the center/surround speakers are set to either "SMALL" or "LARGE" (page 48). • Make sure the surround back speakers are set to "SINGLE" or "DUAL" (page 48). 94US